Routout CNC 10 Amp 3 Axis Kits.

Whether you are building your own CNC Machine/ converting an existing machine or you have simply bought a kit. The Routout CNC 10 Amp driver will enable you to do this with ease. (10 amp Driver will drive machines upto Bridgeport size or flat bed router tables in excess of 2.5 X 2.5 Meters.)

Features:

• · 10A 37V Output Drive Capabilities.
• · 1/2 , 1/4 and 1/6 Step modes
• · 3V to 5V logic inputs.
• · Synchronous Rectification for low power / heat dissipation
• · Internal UVLO and Thermal shutdown circuitry.
• · Small PCB foot print only 105mm x 123mm
• · Internal 5V logic driver onboard (no need for 5v Supply)
• · Enable – Turns the motor off when not being driven.
• · Large built in heatsink with mounting flanges.
• · Opto isolated Inputs
• · Very simple to wire.
• · Compatible with Mach 2 / 3 ,Routout CNC, KCam the list goes on.......

Absolute Maximum Ratings:

• Power Supply Voltage 37 Volts DC
• Logic Input :
  Step / Direction / Enable Voltage
  Logic High Min 3.0 MAX 5 V
  Logic Low MAX 1.5 V
• VREF MAX Voltage 2 Volts
• MAX Output Current 10 A

For more information click here