|
Stepper Components
G210/G201A CASE . Step motor drives 3 axis/4 axis cases are now available for $100. The case is made up of flat panels that are machine to match the G201A/G210 . The case is machined for all required connectors, switches, amps and transformers used in construction of a awesome stepper system. $100 plus $6 s/h
 
Email me for assembled and tested units.
Stepper kitpricing. Items may be bought separately.
G201/.G210 case $100
Db25 with screw terminals $30
4 module heatsink $25
Connector kit $30
3 G201 stepper drivers X$139=417 or
3 G210 stepper drivers X $159=477
3 452 oz inpeak stepper motors $130=390
power supply 36V 25A $125
(Power Supply (Email me. I do not want to sell power supply kits to unqualified people.)
3 motor cables 30
Figure $38 s/h inUSA for the complete kit
G201A (silky smooth) microstepper 7A chopper step motor driver (Assembled):
- VERY Small size (2.5" x 2.5" x 0.85")
- 1 to 7 Amp motor phase currents
- 3.5 oz weight
- 24 to 80 VDC power supply voltage
- Ultra smooth 10-microstep circuit
- Mid-band stabilization
- High speed: up to 200,000 microsteps per second
- Low heating: only 18 Watts at 7 Amps
- Low standby current: 15 mA
- Opto-isolated step and direction inputs
- Disable input freewheels the motor
- Made in the USA
Price $139 + $5 s/h
G210 microstepper with rate multiplier (assembled):
- Supply Voltage: 24 to 80 VDC
- Phase Current: 1 to 7 Amps
- Size: 2.5"W, 2.5"D, .85"H (63.5mm, 63.5mm, 21.5mm)
- Mounting Pattern: 4 6-32 screws, 1.75" by 2.375" (44.5 mm, 60 mm)
- Quiescent Current: 15 Ma or less
- Weight: 3.6 oz. (100 gm)
- Step Frequency: 0 to 200 kHz
- Step Pulse "0" Time: 0.5 uS min (Step on falling edge)
- Temp: 0 to 70 C
- Step Pulse "1" Time: 4 uS min
- Humidity: 0 to 95 % (non-condensing)
- Direction Setup: 1 uS min (20 uS min hold time after Step edge)
- Power Dissipation: 1 to 18 W (1 to 7 Amps)
Price $159 + $5 s/h
|
